MJS500
JSWAY
4, X/YS/Z+B
12 pieces
electric
Availability: | |
---|---|
Machine standard configuration
1. FANUC oi-TF plus
2. JSWAYA 2-6 electric spindle A2-5 electric spindle
3. Automatic lubrication system
4. Cabinet air conditioner
5. Machine lighting LED lamp
6. Deluxe three-color warning lamp
7. Floor pad 1 set
8. Toolbox 1 set
9. Accessory 1 set
10. Data sheet 1 set
11. Cutting liquid system
12. Scroll chuck(6 inch+8 inch)
Machine main parts list
No. | Name | Part No. | Manufacturer or supplier | Quantity |
1 | Machine body | MJS500 | JSWAY | 1 set |
2 | Power turret unit | BMT55 | SAUTER | 1 set |
3 | Spindle unit | A2-6 electric spindle /A2-5electric spindle | JSWAY/FANUC | 1 set |
4 | Linear guide rail | X:35 Y:35 Z1:45 | PMI/HIWIN/HTPM | 1 set |
5 | Ball screw rod | X:32 Y:32 Z:40 | PMI/HIWIN | 1 set |
6 | Z-axis rod bearing | 25TAC | NSK/FAG/NACHI | 1 set |
7 | X-axis rod bearing | 25TAC | NSK/FAG/NACHI | 1 set |
8 | Y-axis rod bearing | 25TAC | NSK/FAG/NACHI | 1 set |
9 | Lubrication unit | JSWAY/CUSTOMIZATION | 1 set | |
10 | Guide retractable guard | JSWAY | 1 set | |
11 | Cooling pump | LUIKAR/ RYUNG | 1 PC | |
12 | System | oi-TF plus | FANUC | 1 set |
13 | Spindle drive | FANUC | 1 set | |
14 | X/Y/Z-axis servo motor | FANUC | 1 set | |
15 | Driven servo motor | FANUC | 1 set | |
16 | Electrical component | SCHNEIDER/CHNT | 1 set |
Note:The standard component listed above is come from regular supplier, but allowing the replacement if any technical modification and improvement, but guarantee the quality of replacement is not lower than the original one.
Machine standard configuration
1. FANUC oi-TF plus
2. JSWAYA 2-6 electric spindle A2-5 electric spindle
3. Automatic lubrication system
4. Cabinet air conditioner
5. Machine lighting LED lamp
6. Deluxe three-color warning lamp
7. Floor pad 1 set
8. Toolbox 1 set
9. Accessory 1 set
10. Data sheet 1 set
11. Cutting liquid system
12. Scroll chuck(6 inch+8 inch)
Machine main parts list
No. | Name | Part No. | Manufacturer or supplier | Quantity |
1 | Machine body | MJS500 | JSWAY | 1 set |
2 | Power turret unit | BMT55 | SAUTER | 1 set |
3 | Spindle unit | A2-6 electric spindle /A2-5electric spindle | JSWAY/FANUC | 1 set |
4 | Linear guide rail | X:35 Y:35 Z1:45 | PMI/HIWIN/HTPM | 1 set |
5 | Ball screw rod | X:32 Y:32 Z:40 | PMI/HIWIN | 1 set |
6 | Z-axis rod bearing | 25TAC | NSK/FAG/NACHI | 1 set |
7 | X-axis rod bearing | 25TAC | NSK/FAG/NACHI | 1 set |
8 | Y-axis rod bearing | 25TAC | NSK/FAG/NACHI | 1 set |
9 | Lubrication unit | JSWAY/CUSTOMIZATION | 1 set | |
10 | Guide retractable guard | JSWAY | 1 set | |
11 | Cooling pump | LUIKAR/ RYUNG | 1 PC | |
12 | System | oi-TF plus | FANUC | 1 set |
13 | Spindle drive | FANUC | 1 set | |
14 | X/Y/Z-axis servo motor | FANUC | 1 set | |
15 | Driven servo motor | FANUC | 1 set | |
16 | Electrical component | SCHNEIDER/CHNT | 1 set |
Note:The standard component listed above is come from regular supplier, but allowing the replacement if any technical modification and improvement, but guarantee the quality of replacement is not lower than the original one.
Model No. | MJS500 | |
Machine | Full function: carving, turning, milling, drilling, and tapping. | Dual spindle + single power turret + turning and milling machine |
AXES | X/YS/Z | |
Operating system | SYNTEC 220TB or FANUC OI-TFPLUS | |
Processing ability | Maximum bar diameter of spindle (MM) | 51 |
Maximum bar diameter of sub-spindle (MM) | 45 | |
Maximum rotation diameter (MM) | 500 | |
Maximum additive length (MM) | 500 | |
Maximum processing diameter (MM) | 400 | |
X-axis maximum travel (MM) | 200 | |
YS axis Maximum travel (MM) | +-50 | |
Z-axis maximum stroke (MM) | 530 | |
X/Z axis fastest movement rate (M/MIN) | 30 | |
Precision | Repeat positioning accuracy (MM) | 0.005 |
Motor | Spindle power (KW) | 18.0 |
Spindle speed (RPM) | 3000 | |
Sub-spindle power (KW) | 11.0 | |
X-axis servo motor (KW) | 1.8 | |
Y-axis servo motor (KW) | 1.8 | |
Z-axis servo motor (KW) | 1.8 | |
Tools | Quantity (pieces) | 12 |
Others | Total machine power (approximate, KW) | 35.0 |
Spindle: | ||
Cylinder: JSWAY customized (inches) | ||
Demension (LWH, approximate, MM) | 2748x2616x2325 | |
Weight (approximate, KG) | 4500 |
Model No. | MJS500 | |
Machine | Full function: carving, turning, milling, drilling, and tapping. | Dual spindle + single power turret + turning and milling machine |
AXES | X/YS/Z | |
Operating system | SYNTEC 220TB or FANUC OI-TFPLUS | |
Processing ability | Maximum bar diameter of spindle (MM) | 51 |
Maximum bar diameter of sub-spindle (MM) | 45 | |
Maximum rotation diameter (MM) | 500 | |
Maximum additive length (MM) | 500 | |
Maximum processing diameter (MM) | 400 | |
X-axis maximum travel (MM) | 200 | |
YS axis Maximum travel (MM) | +-50 | |
Z-axis maximum stroke (MM) | 530 | |
X/Z axis fastest movement rate (M/MIN) | 30 | |
Precision | Repeat positioning accuracy (MM) | 0.005 |
Motor | Spindle power (KW) | 18.0 |
Spindle speed (RPM) | 3000 | |
Sub-spindle power (KW) | 11.0 | |
X-axis servo motor (KW) | 1.8 | |
Y-axis servo motor (KW) | 1.8 | |
Z-axis servo motor (KW) | 1.8 | |
Tools | Quantity (pieces) | 12 |
Others | Total machine power (approximate, KW) | 35.0 |
Spindle: | ||
Cylinder: JSWAY customized (inches) | ||
Demension (LWH, approximate, MM) | 2748x2616x2325 | |
Weight (approximate, KG) | 4500 |